The Active response configuration is divided into two parts. In the first one you configure the commands you want to execute. In the second one, you bind the commands to rules or events.
In the commands configuration you create new “commands” to be used as responses. You can have as many commands as you want. Each one should be inside their own “command” element. For further information please see the examples.
<command> <name>The name (A-Za-Z0-9)</name> <executable>The command to execute (A-Za-z0-9.-)</executable> <expect>Comma separated list of arguments (A-Za-z0-9)</expect> <timeout_allowed>yes/no</timeout_allowed> </command>
name: Used to link the command to the response.
executable: It must be a file (with exec permissions) inside “/var/ossec/active-response/bin”.
You don’t need to provide the whole path.
expect: The arguments this command is expecting (options are srcip and username).
timeout_allowed: Specifies if this command supports timeout.
In the active-response configuration, you bind the commands (created) to events. You can have as many responses as you want. Each one should be inside their own “active-response” element. For further information please see the ` <../../syntax/head_ossec_config.active-response.html#example-active-response-con figurations>`_.
<active-response> <disabled>Completely disables active response if "yes"</disabled> <command>The name of any command already created</command> <location>Location to execute the command</location> <agent_id>ID of an agent (when using a defined agent)</agent_id> <level>The lower level to execute it (0-9)</level> <rules_id>Comma separated list of rules id (0-9)</rules_id> <rules_group>Comma separated list of groups (A-Za-z0-9)</rules_group> <timeout>Time to block</timeout> </active-response>
disabled: Disables the active response capabilities if set to yes. If this is set, active response will not work.
command: Used to link the response to the command
location: Where the command should be executed. You have four options:
local: on the agent that generated the event
server: on the OSSEC server
defined-agent: on a specific agent (when using this option, you need to set the agent_id to use)
all: or everywhere.
agent_id: The ID of the agent to execute the response (when defined-agent is set).
level: The response will be executed on any event with this level or higher.
timeout: How long until the reverse command is executed (IP unblocked, for example).
By default, the ossec hids comes with the following pre-configured active-response tools:
host-deny.sh: Adds an IP to the /etc/hosts.deny file (most Unix systems).
firewall-drop.sh (iptables): Adds an IP to the iptables deny list (Linux 2.4 and 2.6).
firewall-drop.sh (ipfilter): Adds an IP to the ipfilter deny list (FreeBSD, NetBSD and Solaris).
firewall-drop.sh (ipfw): Adds an IP to the ipfw deny table (FreeBSD).
On IPFW we use the table 1 to add the IPs to be blocked. We also set this table as deny in the beginning of the firewall list. If you use the table 1 for anything else, please change the script to use a different table id.
firewall-drop.sh (ipsec): Adds an IP to the ipsec drop table (AIX).
pf.sh (pf): Adds an IP to a pre-configured pf deny table (OpenBSD and FreeBSD).
On PF, you need to create a table in your config and deny all the traffic to it. Add the following lines at the beginning of your rules and reload pf (pfctl -F all && pfctl -f /etc/pf.conf): table <ossec_fwtable> persist #ossec_fwtable
block in quick from <ossec_fwtable> to any block out quick from any to <ossec_fwtable>
firewalld-drop.sh (firewalld): Adds a rich-rule to block an IP to firewalld (Linux with firewalld enabled).
You must manually enable this script in ossec.conf if you have firewalld enabled. The script will add (and remove) a rich-rule that drops all incoming communication from the supplied srcip.